MIXING RATIO

Add (1) 25kg bag of SikaTile® 390 Heavy Duty Tile Adhesive to approximately 5.5 to 6 liters of clean water, mixing continuously until a lump-free, creamy consistency is achieved.

APPLICATION INSTRUCTION

General Condition All surfaces must be structurally sound, dry, clean, and free from oil, grease, wax, dust, and other contaminants.

All surfaces should be dampened using a sponge or cloth immediately before application. Very porous surfaces should be properly primed to ensure adhesion. Concrete Surfaces.

Remove all release agents, especially on tilt-up slabs. New concrete must be cured for at least 28 days before application.

Steel trowel finished concrete should be acid-etched or wire brushed prior to tiling.

Rendered Surfaces Newly rendered surfaces must be cured for at least 7 days before application.

Painted surfaces must be scrubbed or abraded to expose at least 75% clean surfaces.

APPLICATION

Prepare the adhesive as instructed. Allow the mix to stand for 1 to 2 minutes, then remix before use. Spread adhesive onto the substrate using: 6mm x 6mm notched trowel for wall tiling. 10mm x 10mm notched trowel for floor tiling. Trowel size depends on tile size, depth of knobs, grooves, or ridges on tile back, substrate evenness. For tiles with deep grooves or ridges (e.g., slate or lugged tiles), butter coat adhesive on the back of the tile in addition to notched trowel application. Thicker adhesive beds help compensate for uneven substrates, especially slates. Do not spread more than 1 sqm of adhesive at a time. Ensure adhesive remains wet when tiles are laid and tapped into position for full contact. Ensure no voids under tiles. Do not allow adhesive to skin over before tiling. Install tiles within the open time specified. Do not disturb or walk on tiles for 24 hours after installation. Grouting should preferably be carried out at least 24 hours after the completion of tiling. For best results use SikaTile® Grout.

45cm x 30cm x 10cm

FOR PAYMENT:
(1) Paymongo: Mastercard, VISA, GCash, Maya, Grab Pay, Billease (Installment)
(2) Online Bank Transfer to our BDO, Metrobank, and BPI accountsFor more details, kindly check Accepted Modes of Payment

You'll have a dedicated truck or motorcycle per order, straight to your site. One fee covers the full load, so order big and save on every trip.

(Customer Location) in Metro Manila (NCR)

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Metro Manila**
Lalamove/ Grab Pin: LPM Construction Supply and Wood Center Corporation

(Customer Location) in Pangasinan

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Pangasinan**
Lalamove/ Grab Pin: LPM Construction Supply PangasinanBrgy, Tayug-San Quintin Rd. Tayug,
Pangasinan, PH