1. Surface Preparation

Concrete Substrate: Remove all deteriorated, loose, or delaminated concrete. Clean the area thoroughly to eliminate bond-inhibiting materials like dust, oil, or grease.

Surface Profile: Mechanical roughening (e.g., hydro-blasting or scarifying) should be used to achieve an open-textured surface profile.

Steel Reinforcement: Clean exposed rebar mechanically to remove all traces of rust, scale, or corrosion.

Pre-Wetting: Thoroughly soak the concrete substrate with clean water until it reaches a Saturated Surface Dry (SSD) condition. Ensure there is no standing or glistening water left on the surface before material application.

2. Mixing Instructions

Equipment: Use a heavy-duty, low-speed drill (300–450 rpm) equipped with a clean mud/paddle mixer. For large volume applications, use a conventional mortar or concrete mixer.

Procedure:Pour the minimum recommended amount of cool, potable water into the clean mixing container.

Add the dry bag powder slowly while mixing continuously to prevent clumping.

Mix thoroughly for a minimum of 3 minutes until a completely uniform and lump-free consistency is achieved.

Adjust with a small amount of remaining water if needed to reach the desired consistency, but never over-water the mix.

3. Application Methods

Form & Pour / Form & Pump: If utilizing a self-consolidating or highly fluid variant, pour or pump the mixed material directly into firmly anchored, watertight forms. Material flows smoothly through internal rebar without requiring mechanical vibration.

Hand / Trowel Applied: For thicker overhead or vertical patches, pack and compact the mortar firmly against the SSD substrate using a trowel. Ensure complete consolidation behind any exposed reinforcement bars.

Layer Thickness: Maintain application limits strictly within the specified structural boundaries (typically a minimum depth of 25 mm up to product-specific maximums per layer).

FOR PAYMENT:
(1) Paymongo: Mastercard, VISA, GCash, Maya, Grab Pay, Billease (Installment)
(2) Online Bank Transfer to our BDO, Metrobank, and BPI accountsFor more details, kindly check Accepted Modes of Payment

You'll have a dedicated truck or motorcycle per order, straight to your site. One fee covers the full load, so order big and save on every trip.

(Customer Location) in Metro Manila (NCR)

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Metro Manila**
Lalamove/ Grab Pin: LPM Construction Supply and Wood Center Corporation

(Customer Location) in Pangasinan

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Pangasinan**
Lalamove/ Grab Pin: LPM Construction Supply PangasinanBrgy, Tayug-San Quintin Rd. Tayug,
Pangasinan, PH