Mixing. Pour liquid part into clean container. Slowly add powder part into the container and mix with a slow speed mechanical mixer until homogeneous and lump free.

Allow the mix to stand for 5 minutes and re-stir manually before use.

Application. For best results, damp the surface before coating. For horizontal and vertical surface, a roller, a brush or spray gun may be used to apply the slurry. Care must
be taken to ensure that air is not entrapped in the membrane. Apply the first coat and work generously to fill all the pores and honeycombs. Allow the membrane to dry
approximately 2 to 3 hours prior to application of a second coat. The second coat must be applied crosswise. After
applying the second coat of PIONEER PRO Water-Tite 103, allow a minimum curing time interval of 15-72 hours before laying the screed and commencing pond test. Should
ponding test exceed 4 hours, a minimum curing time interval of 72 hours is recommended.

Cleaning. Clean all tools or equipment used while coating is still in its uncured state. Use water to clean tools and spills. Use lacquer thinner to clean cured liquid part of Water-Tite 103 on tools and equipments.

FOR PAYMENT:
(1) Paymongo: Mastercard, VISA, GCash, Maya, Grab Pay
(2) Online Bank Transfer to our BDO, Metrobank, and BPI accountsFor more details, kindly check Accepted Modes of Payment

FOR SHIPPING:
(Customer Location) in Metro Manila (NCR)

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Metro Manila**
Lalamove/ Grab Pin: LPM Construction Supply and Wood Center Corporation

(Customer Location) in Pangasinan

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Pangasinan**
Lalamove/ Grab Pin: LPM Construction Supply PangasinanBrgy, Tayug-San Quintin Rd. Tayug,
Pangasinan, PH