SURFACE PREPARATION: Make sure the substrate is free from any dust, debris, oil, wax, grease etc. It is important to wipe down the surface with a sponge/foam soaked with clean water prior to application of DURAPLAS MAXI for good adhesion. For repainting jobs, remove existing paint via sanding. Remove as much as possible without damaging the concrete surface.

Step 1: After prepping, make sure the surface is thoroughly wet/damp with no excess water. (TO AVOID BACKJOB REPAIRS DUE TO FLAKING, POWDERING & DELAMINATION) (Maintain temperature to 25°C or lower)

Step 2: On a clean mixing board or pail, place an adequate amount of DURA-PLAS MAXI. After which, pour in a measured amount of clean water onto the mixture. Keep stirring until it is free from lumps and a consistent mixture is attained. Let it stand for 3 to 5 mins then re-stir. DO NOT RETEMPER OR ADD WATER AFTER MIXTURE HAS SET

Step 3: Apply the 1st coat by using EUROBLADE finishing trowel in a forceful pressing down motion to fill all the cracks. Make sure to completely cover your wall or ceiling from edge to edge. Leave it until it is touch dry

Step 4: Apply the 2nd coat as a final topping to even out the flaws that was yet to be corrected by the 1st coat. Let it cure for a minimum of 24hrs.

Step 5: Use at least a 400grit sandpaper to even out the imperfections caused by human error. AVOID CONTINUOUS HEAVY SANDING.

Step 6: Wash down the surface with clean water to remove all the dust from sanding. Let dry for 24hrs.

Step 7: Apply one coat of flat latex paint then finish with a gloss or semi-gloss topcoat paint.
For a non painted finish, you can use DURA-SEAL as a topcoat.

Water Ratio: 9L of water per 20kgs Mortabond DURA-PLAS MAXI

15kg bag

FOR PAYMENT:
(1) Paymongo: Mastercard, VISA, GCash, Maya, Grab Pay, Billease (Installment)
(2) Online Bank Transfer to our BDO, Metrobank, and BPI accountsFor more details, kindly check Accepted Modes of Payment

You'll have a dedicated truck or motorcycle per order, straight to your site. One fee covers the full load, so order big and save on every trip.

(Customer Location) in Metro Manila (NCR)

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Metro Manila**
Lalamove/ Grab Pin: LPM Construction Supply and Wood Center Corporation

(Customer Location) in Pangasinan

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Pangasinan**
Lalamove/ Grab Pin: LPM Construction Supply PangasinanBrgy, Tayug-San Quintin Rd. Tayug,
Pangasinan, PH