Application

All surfaces to be treated must be as clean and dry as possible.

It may be necessary to wire brush areas where dirt or scale cannot be removed, with a stiff broom. Moisture content should not be at the saturated zone.

Check surface for cracks, splits, flashing, coverings, etc. Where cracks exceed 1 mm, they must be filled with fabric matting, followed by a liberal application of DAVCO K10 PREMIUM.

For reduction in blistering and better adhesion to concrete substrate, prime area with Davco K10 Acrylic Primer prior to application.

DAVCO K10 PREMIUM should be applied directly from the pail.

Apply one coat of DAVCO K10 PREMIUM to the whole area and allow to cure, approx. 6-10 hours.
(Temperature dependent)

Apply the 2nd coat in a perpendicular direction to the 1st coat.

All joints in floors should preferably be treated with additional coat of DAVCO K10 PREMIUM.
DAVCO K10 PREMIUM can be applied by brush or roller.

Normally a minimum of 2 coats is required, unless a trowel method of application is adopted.

Where DAVCO K10 PREMIUM has to be applied to above a height of 500mm from the floor level, a wire mesh is recommended to be fixed prior to applying the protective render to prevent cracking and to improve adhesion.

Ponding should be carried out at least 48 hours after the final application of DAVCO K10 PREMIUM.

pail (30.5cm x 30.5cm x 40cm)

付款方式：
(1) Paymongo：万事达卡、VISA、GCash、Maya、Grab Pay
（2）网上银行转账至我们的 BDO、Metrobank 和 BPI 账户有关更多详情，请查看接受的付款方式

运输：
（客户地点）位于马尼拉大都会 (NCR)

（1）加急——当天取货
（2）定期取货
（3）通过第三方提货/送货*
（4）送货至马尼拉大都会的站点**
Lalamove/抓钉：LPM 建筑供应和木材中心公司

（客户所在地）位于 Pangasinan

（1）加急——当天取货
（2）定期取货
（3）通过第三方提货/送货*
（4）运送至邦阿西楠省的现场位置**
Lalamove/抓斗销：LPM Construction Supply PangasinanBrgy, Tayug-San Quintin Rd.塔于格,
菲律宾邦阿西楠省